VDS-VRQ3-85M-NOZ VRQ3-85M Vapour Recovery Fuel Nozzle for VRQ3-85M
VDS-VRQ3-85M-NOZ for petrol stations and fuel dispensers. Model VRQ3-85M, 12 Months warranty, MOQ 1 piece. Supplied under the Vidishi Auto brand.
$60.00
100% Secure Checkout
Free Shipping Over $1099
Customer Satisfaction
International Shipping
Product Specifications
Product Details
At a glance
Check fitment before you order
Built to model VRQ3-85M and supplied new under the Vidishi Auto brand. The 12 specification rows below run from working pressure through to safety; a row is only listed where the value is confirmed for this part.
Part number match
The order reference for this item is VDS-VRQ3-85M-NOZ, built to model
VRQ3-85M. Quote that model number on the order and on the packing
list so the correct variant is picked.
Fitment verification
Stage II vapour recovery dispensing on petrol stations, for both centralised and dispersed recovery systems. The M42 x 1.5 inlet suits the standard coaxial recovery hose; check the dispenser coupling and the recovery line before fitting. The nozzle is designed for methanol and petrol grades, not for water-based or highly viscous fluids.
Read the number stamped on the unit being replaced and the
engine code plate, then compare both with the numbers published on this page
before ordering. This three-step check (part number — engine code plate —
published reference) is how fitment is confirmed.
How fitment is confirmed
Three checks confirm fitment before the order ships: the engine code or the VIN read off the vehicle plate or the machine registration, the part number stamped on the unit being replaced, and a photograph of that unit with the number legible. Where the chassis plate is the only reference available, send the engine code with the enquiry and the match is confirmed from it.
Category
This item sits in the site’s Fuel System > Fuel Dispenser Parts category. Ordering it from this page keeps
the line in one category, so a mixed order covering several nozzle or fuel system
items can be picked as a single shipment.
Specifications
| Working pressure | 0.035 – 0.35 MPa |
|---|---|
| Maximum flow rate | 85 L/min or more |
| Maximum vapour recovery | 120 L/min or more |
| Inlet thread | M42 x 1.5 |
| Vapour connector bore | 14 mm (+0.043 / 0) |
| Spout outside diameter | 28 mm |
| Conductive resistance | 4 ohms or less |
| Overall dimensions | 359 x 59 x 222 mm |
| Body material | Anodised aluminium |
| Seals | Special-grade fluoro rubber |
| Suitable fluids | 100 % methanol and other fuels |
| Safety | Pressure-operated self-sealing; main valve opens against the fuel flow |
| Model number | VRQ3-85M |
| Reference | VDS-VRQ3-85M-NOZ |
| Product type | Vapour Recovery Fuel Nozzle |
| Supplied brand | Vidishi Auto |
| Reference design | reference only — compatible replacement |
| Application | petrol stations and fuel dispensers |
| Material | Anodised aluminium body with a stainless steel spout and fluoro-rubber seals |
| Condition | New |
| Warranty | 12 Months |
| Minimum order | 1 piece |
Two rows on this table decide most enquiries about the item: working pressure and vapour connector bore. The remaining 10 rows separate this build from the neighbouring variants in the same family, so a buyer who reads only the first two should still check the rest against the unit being replaced.
Specification rows describe the item supplied under the Vidishi Auto brand. Fitment-relevant values must be confirmed against the unit being replaced; packaged shipping figures are not published because no source states them.
What the buyer gets
Eight of the 12 published specification rows are set out below. The rest are
in the specification table above.
Working pressure
0.035 – 0.35 MPa
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Maximum flow rate
85 L/min or more
This variant separates itself from the neighbouring models in the same family.
Maximum vapour recovery
120 L/min or more
This variant separates itself from the neighbouring models in the same family.
Inlet thread
M42 x 1.5
For this this part, that figure decides whether the part can be used at all.
Vapour connector bore
14 mm (+0.043 / 0)
A buyer checks this on the this part first, because nothing else on the part can be confirmed without it.
Spout outside diameter
28 mm
Buyers ask for this one on almost every enquiry, so it is stated rather than buried in the table.
Conductive resistance
4 ohms or less
The workshop asks for this one before ordering, not after, so it is published here.
Overall dimensions
359 x 59 x 222 mm
The workshop asks for this one before ordering, not after, so it is published here.
How it is used
Sequence
- Check the recovery hose coupling and the coaxial spigot thread before the nozzle is fitted.
- Confirm the recovery shroud sits square on the filler neck, because that seal drives recovery efficiency.
- Test the pressure-operated self-sealing valve with the line pressurised but the trigger held closed.
- Check the trigger latch holds each of its positions and that the breakaway still releases.
- Log the nozzle against the dispenser so a rising vapour ratio can be traced to a worn shroud.
Have these to hand first
- Recovery shroud
- Coaxial hose gasket
- Service kit for the main valve seat
The list is what the job consumes, not part of the item supplied
unless a specification row above says so.
or the vehicle service procedure. Torque figures, pressures and safety limits come from the
equipment documentation, not from this page.
Documented limits and things that go wrong
The nozzle is designed for petrol and for methanol grades. Water-based and viscous fluids are not covered.
The self-sealing valve means the nozzle cannot be opened without line pressure – that is deliberate, not a fault.
Vapour recovery performance depends on the shroud sealing on the filler neck, so a new nozzle on a hardened shroud does not restore the ratio.
Every figure in the specification table – working pressure, maximum flow, maximum vapour recovery, inlet thread, vapour connector bore, spout diameter, conductive resistance and overall dimensions – is the maker’s own published data for this model.
Conductive resistance of 4 ohms or less is the maker’s figure and is what keeps static charge under control during dispensing, so it is published as a specification rather than as a claim.
The maker states methanol and other fuels as the suitable media, so no claim is made about water-based or viscous fluids.
Symptom and first check
| Vapour ratio drifts high | the recovery shroud is not sealing on the filler neck. |
|---|---|
| Nozzle will not open | there is no line pressure, which is how the self-sealing valve is designed to behave. |
| Fuel drips after shut-off | the main valve seat is worn and the nozzle needs a service kit. |
How we label data on this page
| Model number VRQ3-85M | Published — stated on the specification table above |
|---|---|
| Product type and application | Published — stated on the specification table above |
| Fitment and duty limits | Confirm before order — must be checked against the equipment the item works on |
| Packaged shipping weight | Not published — no source states it for this exact part |
| Carton dimensions for multi-unit orders | Not published — quoted with the order against the actual quantity |
| Individual seal part numbers | Not published — the documentation available for this item does not state it |
| Breakaway release force | Not published — the documentation available for this item does not state it |
| Shroud material grade | Not published — the documentation available for this item does not state it |
confirm. Ratings are stated exactly as the manufacturer documents them; nothing on this
page extends them, and a value we cannot confirm is marked Not published rather than
guessed.
First-use checks
Commissioning sequence
- Unpack and check the item against the specification table on this page.
- Confirm the model number VRQ3-85M on the packing list matches the item received.
- Read the 12 specification rows that apply to your application before first use.
- Confirm the recovery hose coupling and the coaxial thread before the nozzle is fitted.
- Check the shroud on the filler neck after fitting, because that is where recovery is won or lost.
- Record the installation date so the inspection interval can be planned.
Before it goes into service
Log the nozzle against the dispenser at fitment so a drift in vapour ratio can be traced to a specific body later.
Warranty cover runs for 12 Months from delivery on the supplied item.
Where this vapour recovery fuel nozzle is used
Stage II vapour recovery dispensing on petrol stations, for both centralised and dispersed recovery systems. The M42 x 1.5 inlet suits the standard coaxial recovery hose; check the dispenser coupling and the recovery line before fitting. The nozzle is designed for methanol and petrol grades, not for water-based or highly viscous fluids.
This vapour recovery fuel nozzle is supplied for petrol stations and fuel dispensers. The application list below is built from the published fitment data for this part number rather than a generic catalogue sweep, which is why it is shorter and more specific than a parts-finder list.
- Petrol stations
- Stage II vapour recovery
- Dispersed vapour recovery
- Centralised vapour recovery
- Methanol and M85 dispensing
- Fleet refuelling sites
Fitment verification: Stage II vapour recovery dispensing on petrol stations, for both centralised and dispersed recovery systems. The M42 x 1.5 inlet suits the standard coaxial recovery hose; check the dispenser coupling and the recovery line before fitting. The nozzle is designed for methanol and petrol grades, not for water-based or highly viscous fluids.
The application list is a guide, not a guarantee of fit. Confirm the
model number on the unit and the part number being replaced before ordering.
Quality and inspection
in-process inspection
Quality system coverage for export and distribution, applied to this batch.
New condition
Supplied new, with 12 Months warranty on the delivered item. The vapour recovery fuel nozzle is built to model
VRQ3-85M and packed against that model number.
Specification count
12 specification rows are listed on this page for the vapour recovery fuel nozzle, from working pressure to safety.
exact part; anything else is marked Not published rather than guessed.
Related search terms
A buyer searching vapour recovery fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is working pressure: 0.035 – 0.35 MPa. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching vrq3-85m vapour recovery fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum flow rate: 85 L/min or more. It appears on the specification table above as well, so page and order agree.
A buyer searching vapor recovery nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum vapour recovery: 120 L/min or more. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is inlet thread: M42 x 1.5. It is the value the test bench has to reproduce before the part is released.
A buyer searching gas station nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is vapour connector bore: 14 mm (+0.043 / 0). Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching diesel fuel nozzle adapter is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is spout outside diameter: 28 mm. It separates this build from the neighbouring variants in the same family.
A buyer searching fill-rite fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is conductive resistance: 4 ohms or less. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching automatic fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is overall dimensions: 359 x 59 x 222 mm. It appears on the specification table above as well, so page and order agree.
A buyer searching automatic shut off fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is body material: Anodised aluminium. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fill rite fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is seals: Special-grade fluoro rubber. It is the value the test bench has to reproduce before the part is released.
A buyer searching vapor recovery nozzles is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is suitable fluids: 100 % methanol and other fuels. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching vapour recovery nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is safety: Pressure-operated self-sealing; main valve opens against the fuel flow. It separates this build from the neighbouring variants in the same family.
A buyer searching vapor recovery nozzle apes is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is working pressure: 0.035 – 0.35 MPa. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching fuel nozzle holder bracket is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum flow rate: 85 L/min or more. It appears on the specification table above as well, so page and order agree.
A buyer searching jet a fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum vapour recovery: 120 L/min or more. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching 1 inch diesel fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is inlet thread: M42 x 1.5. It is the value the test bench has to reproduce before the part is released.
A buyer searching auto shutoff fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is vapour connector bore: 14 mm (+0.043 / 0). Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching vapor recovery nozzle how it works is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is spout outside diameter: 28 mm. It separates this build from the neighbouring variants in the same family.
A buyer searching how does a vapor recovery nozzle work is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is conductive resistance: 4 ohms or less. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching fuel dispenser nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is overall dimensions: 359 x 59 x 222 mm. It appears on the specification table above as well, so page and order agree.
A buyer searching fuel nozzle keeps clicking off is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is body material: Anodised aluminium. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching fuel nozzle repair services is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is seals: Special-grade fluoro rubber. It is the value the test bench has to reproduce before the part is released.
A buyer searching vapour recovery fuel nozzle for petrol stations is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is suitable fluids: 100 % methanol and other fuels. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching vapour recovery fuel nozzle for stage ii vapour recovery is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is safety: Pressure-operated self-sealing; main valve opens against the fuel flow. It separates this build from the neighbouring variants in the same family.
A buyer searching vapour recovery fuel nozzle for dispersed vapour recovery is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is working pressure: 0.035 – 0.35 MPa. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching vapour recovery fuel nozzle for centralised vapour recovery is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum flow rate: 85 L/min or more. It appears on the specification table above as well, so page and order agree.
A buyer searching vapour recovery fuel nozzle for methanol and m85 dispensing is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is maximum vapour recovery: 120 L/min or more. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching vapour recovery fuel nozzle wholesale is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is inlet thread: M42 x 1.5. It is the value the test bench has to reproduce before the part is released.
A buyer searching vapour recovery fuel nozzle supplier is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is vapour connector bore: 14 mm (+0.043 / 0). Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching bulk vapour recovery fuel nozzle is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is spout outside diameter: 28 mm. It separates this build from the neighbouring variants in the same family.
A buyer searching vapour recovery fuel nozzle manufacturer is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is conductive resistance: 4 ohms or less. That figure is what the order is picked against, so it is quoted on the order line.
A buyer searching vapour recovery fuel nozzle factory direct is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is overall dimensions: 359 x 59 x 222 mm. It appears on the specification table above as well, so page and order agree.
A buyer searching vapour recovery fuel nozzle distributor is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is body material: Anodised aluminium. The workshop uses it to confirm the item before it leaves the shelf.
A buyer searching vapour recovery fuel nozzle for workshop is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is seals: Special-grade fluoro rubber. It is the value the test bench has to reproduce before the part is released.
A buyer searching vapour recovery fuel nozzle OEM equivalent is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is suitable fluids: 100 % methanol and other fuels. Where the value is not published for this item, the table above says so rather than guessing.
A buyer searching vapour recovery fuel nozzle export is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is safety: Pressure-operated self-sealing; main valve opens against the fuel flow. It separates this build from the neighbouring variants in the same family.
A buyer searching vapour recovery fuel nozzle petrol stations and fuel dispensers is normally matching a job on the petrol stations and fuel dispensers, and the deciding check is working pressure: 0.035 – 0.35 MPa. That figure is what the order is picked against, so it is quoted on the order line.
The search terms above are the type term and its model-qualified form,
collected from the specification table published on this page; each one maps to a
model-number-matched line on the order.
Wholesale and B2B supply
High-flow vapour recovery nozzles for fuel equipment distributors, station contractors and dispenser service companies.
- Minimum order: 1 piece
- Container and consolidated shipment quotes
- Neutral or Vidishi Auto branding options
- Model-number matched picking and packing lists
Request a quote
Send the model number, quantity and destination for a delivered total. Model
VRQ3-85M, MOQ 1 piece, 12 Months warranty – wholesale, container and
consolidated pricing on request.
Pricing is quoted per order. This page carries no published tariff.
Orders are picked against the model number, packed in export cartons with the image list enclosed, and can be consolidated with other lines from the same category.
Lead time is quoted with the order against the destination and the
quantity, and is confirmed before production starts.
Choosing between options
| High-flow vapour recovery nozzle | recovers vapour while dispensing at up to 85 L/min or more, which is this part |
|---|---|
| Standard recovery nozzle | lower flow, which slows a busy forecourt |
| Non-recovery nozzle | no vapour line, so it cannot be used on a Stage II forecourt |
For a forecourt the deciding question is the recovery system the nozzle is fitted to, because a dispersed system and a centralised system ask different things of the shroud.
This comparison describes product categories, not brands. It is a
selection aid, not a performance claim.
Image set
5 images are published for this item, distributed across the modules
above. Every frame is photographed from this product.
Frame by frame: Spout and recovery bellows at the top; Coaxial spout seen from the side; Inlet boss and spout in line; Trigger grip and guard; Recovery shroud behind the guard.
The same file names appear in the image list issued with the order.
Frequently asked questions
Is this a genuine the original equipment maker product?
No. It is a compatible replacement supplied under the Vidishi Auto brand to the specification published on this page. It is not a genuine the original equipment maker product and is not affiliated with the original equipment maker. Where a reference part number appears it identifies the equipment being replaced, not an original-equipment product, and no affiliation with the original equipment maker is claimed.
What does model VRQ3-85M cover?
12 specification rows are published for it, from working pressure to safety. The delivered material is Anodised aluminium body with a stainless steel spout and fluoro-rubber seals and the stated warranty is 12 Months.
How do I confirm this fits before ordering?
Read the model number or the part number stamped on the unit being replaced and compare it with the reference numbers on this page. Stage II vapour recovery dispensing on petrol stations, for both centralised and dispersed recovery systems. The M42 x 1.5 inlet suits the standard coaxial recovery hose; check the dispenser coupling and the recovery line before fitting. The nozzle is designed for methanol and petrol grades, not for water-based or highly viscous fluids.
Do you supply this in wholesale quantities?
Yes. The minimum order is 1 piece, and container and consolidated shipment quotes are available on request.
What warranty applies?
The supplied item carries a 12 Months warranty. Warranty terms are published on the site warranty page.
Which images on this page are of this product?
All of them. Every frame on this page shows this exact item.
What is the lead time on this item?
Lead time is quoted per order against the model number, the quantity and the destination, and it is confirmed on the order acknowledgement before production starts. Consolidated shipments follow the same confirmation.
What happens if it does not fit?
Returns are handled under the site returns policy. Fitment is confirmed by the model number and the number stamped on the unit being replaced before dispatch, which is what keeps a wrong-part return from happening in the first place.
Is a public price shown here?
No. Pricing is quoted per order against model number, quantity and destination. Send those three details and a delivered total comes back.
Support and ordering information
Need this part matched?
Send the model number or the part number stamped on the unit you are replacing, and
we return the matched item with a delivered quotation. Technical answers always
match the specification shown above, so what we quote and what you read here never
disagree.
Fitment is confirmed by model number and stamped part number.
Application lists are a guide, not a guarantee of fit.
Order checklist
- Model number: VRQ3-85M
- Reference part number: VDS-VRQ3-85M-NOZ
- Minimum order: 1 piece
- Warranty: 12 Months
- Brand: Vidishi Auto
Reviews